| MATERIAL | STEEL COMP 420 END PLATE |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 440C ROLLER |
| PLASTIC POLYAMIDE SEAL |
| STEEL COMP 420 STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE END PLATE |
| AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE STUD |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD LENGTH | 0.3360 INCHES MINIMUM AND |
| 0.3760 INCHES MAXIMUM |
| OVERALL LENGTH | 1.3180 INCHES MINIMUM AND |
| 1.3810 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| STUD DIAMETER | 0.3105 INCHES MINIMUM AND |
| 0.3120 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND |
| 0.4330 INCHES MAXIMUM |
| STUD LENGTH | 0.8260 INCHES MINIMUM AND |
| 0.8730 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; SPHERICAL OD,7.560 IN. R; SLOT IN BOTTOM OF SHANK,0.066 IN. MIN AND 0.072 IN. MAX W X 0.094 IN. MIN AND 0.100 IN. MAX DEPTH; COTTER PIN HOLE IN SHANK |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 76301 |
| MFR SOURCE CONTROLLING REFERENCE | ST4M205-5 |