| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.5000 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OVERALL OUTSIDE DIAMETER | 1.1250 INCHES NOMINAL |
| OVERALL WIDTH | 0.3125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | PROTECTIVE SHIELD PROVIDED W/EACH SEAL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |