| BORE DIAMETER | 0.12485 INCHES MINIMUM AND 0.12500 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.3580 INCHES MINIMUM AND 0.3590 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0300 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| INNER RING WIDTH | 0.1708 INCHES MINIMUM AND 0.1718 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0004 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OUTER RING OUTSIDE DIAMETER | 0.31235 INCHES MINIMUM AND 0.31250 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.1396 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |