| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 1.5000 INCHES NOMINAL |
| INNER RING WIDTH | 2.7500 INCHES NOMINAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 2.6900 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 3.0000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392 FED SPEC 2ND MATERIAL RESPONSE OR L-P-410,TY 6/6 FED SPEC 3RD MATERIAL RESPONSE SEAL |
| MATERIAL | PLASTIC POLYAMIDE (NYLON) OR PLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL |
| MATERIAL | STEEL OR STEEL CORROSION RESISTING END PLATE |
| MATERIAL | STEEL OR STEEL CORROSION RESISTING OUTER RING |
| MATERIAL | STEEL OR STEEL CORROSION RESISTING ROLLER |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | OIL HOLES AND OIL GROOVE IN INNER RING,NO OIL HOLES OR OIL GROOVE IN OUTER RING |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS |
| STYLE DESIGNATOR | AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE |
| SURFACE TREATMENT | CADMIUM OR OXIDE INNER RING |
| SURFACE TREATMENT | CADMIUM END PLATE |
| SURFACE TREATMENT | CHROMIUM OUTER RING |