| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC PHENOLIC AND |
| PAPER OR |
| COTTON AND |
| GLASS RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.2925 INCHES MINIMUM AND |
| 0.3125 INCHES MAXIMUM |
| BORE DIAMETER | 1.6247 INCHES MINIMUM AND |
| 1.6250 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.8746 INCHES MINIMUM AND |
| 1.8750 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | ANGULAR |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| SPECIAL FEATURES | INNER RACE,OUTER RACE,AND BALLS PASSIVATE PERQQ-P-35 ; LUBRICATE BY VACUUM IMPREGNATION CENTRIFUGE BEARING AT 200 PLUS OR MINUS 20 G FOR 2 TO 2.25OMINUTES ; INSCRIBED V MATCH MARK ON OUTSIDE DIAMETER OF BEARING ; PACKAGE PER MIL-B-117 TYPE 1 CLASS E |