|
|
|
National Stock Number:
3110-01-172-2076
Federal Supply Class:
3110
National Item Identification Number:
011722076
Description:
BEARING,ROLLER,NEEDLE
Detail:
A single or multiple-row antifriction bearing used with or without inner or outer races characterized by relatively small size rollers usually not ranging above 0.250 inch (6.35mm) diameter and generally longer in length in relation to diameter.
|
Manufacturer Information:
| 25Z118 D0 | 27315 | MORRIS MATERIAL HANDLING, INC. | | 6532C366-1 | 5XMS1 | JTEKT BEARINGS NORTH AMERICA LLC | | JTT-1814 | 5XMS1 | JTEKT BEARINGS NORTH AMERICA LLC | | JTT-1814-AID | 5XMS1 | JTEKT BEARINGS NORTH AMERICA LLC | | JTT-1814 | 60380 | TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT | | 6532C366-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| ALIGNMENT TYPE | RIGID | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 1.1250 INCHES NOMINAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | ALVANIA 2,FSCM 86961 MFR REF SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OVERALL OUTSIDE DIAMETER | 1.3750 INCHES NOMINAL | | OVERALL WIDTH | 0.8650 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | MATERIAL | STEEL ROLLER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS | | STYLE DESIGNATOR | NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL | | SURFACE FINISH | GROUND |
|
|