| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| LONG END SHAFT DIAMETER | 0.6262 INCHES MINIMUM AND 0.6267 INCHES MAXIMUM |
| LONG END SHAFT LENGTH | 1.9630 INCHES MINIMUM AND 2.0330 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | NLG13,FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OR 9985371,FSCM 24617 MFR REF SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 5.8420 INCHES MINIMUM AND 5.8720 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| MATERIAL | GREASE LUBRICATION |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR STEEL RETAINER |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL OUTER RING |
| MATERIAL | STEEL SHAFT |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| RETAINER FABRICATION METHOD | MOLDED |
| SEAL QUANTITY | 2 |
| SHORT END SHAFT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHORT END SHAFT LENGTH | 1.0940 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM |
| STYLE DESIGNATOR | FAN AND WATER PUMP BALL TYPE |
| SPECIAL FEATURES | SHORT SHAFT END TAPERED 1.5000 IN. PER FT AND INTERNALLY THREAD WITH A 1.0000 IN. MIN THD LG; 7 GM MIN,8 GM MAX OF NLG13 GREASE OR 45 PCT FULL OF GM9985371 GREASE; PRESSED FABRICATION METHOD IF STEEL RETAINER |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2B |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 20 |