| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL CORROSION RESISTING RETAINER |
| STEEL CORROSION RESISTING SHIELD |
| STEEL COMP 440C SPACER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SPACER |
| OVERALL WIDTH | 1.5750 INCHES MINIMUM AND |
| 1.5850 INCHES MAXIMUM |
| BORE DIAMETER | 0.2498 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | XRL 743A,FSCM 19135 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | COILED |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | ANGULAR |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| BEARING PRELOAD RATING | 2.0 POUNDS MINIMUM AND |
| 3.0 POUNDS MAXIMUM |
| CONTACT ANGLE | 13.0 DEGREES NOMINAL |
| SPECIAL FEATURES | PASSIVATE,QQ-P-35 OVERALL;INNER AND OUTER RING SPACERS; DIP AND CENTRIFUGE AT 200 G F 0.9 MIN TO 1.1 MAX MINUTES WITH SPECIFIED LUBRICANT |
| SPECIFICATION/STANDARD DATA | 58260-13084578 GOVERNMENT SPECIFICATION |