| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT | CHROMIUM INNER RING |
| SURFACE TREATMENT | PASSIVATE OUTER RING |
| BORE DIAMETER | 2.9996 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | COTTON AND PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL OUTSIDE DIAMETER | 3.4996 INCHES MINIMUM AND 3.5000 INCHES MAXIMUM |
| OVERALL WIDTH | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | 20 DROPS OF SPECIFIED LUBRICANT FROM A NO. 26 HYPODERMIC NEEDLE |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |