| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC PHENOLIC RETAINER |
| RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SHIELD |
| STEEL COMP 440C SNAP RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| AISI ASSN STD SINGLE MATERIAL RESPONSE OR |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SNAP RING |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| OVERALL WIDTH | 1.0000 INCHES NOMINAL |
| BORE DIAMETER | 0.7500 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.5650 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIS-30520,FSCM 83086 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 1 |
| LOAD DIRECTION | ANGULAR |
| INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND |
| 0.0012 INCHES MAXIMUM RADIAL |
| BEARING PRELOAD RATING | 7.0 POUNDS MINIMUM AND |
| 8.0 POUNDS MAXIMUM |
| CONTACT ANGLE | 20.0 DEGREES NOMINAL |