| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC PHENOLIC RETAINER |
| RUBBER CHLOROPRENE CLASS CR SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MIL-P-79,FORM T,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MIL-R-6855,CLASS 2,TYPE A MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.8350 INCHES MINIMUM AND |
| 0.8450 INCHES MAXIMUM |
| BORE DIAMETER | 8.9993 INCHES MINIMUM AND |
| 9.0000 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 9.7493 INCHES MINIMUM AND |
| 9.7500 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | LIPS TURNED INWARDLY |
| LOAD DIRECTION | ANGULAR |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| BEARING PRELOAD RATING | 720.0 POUNDS MINIMUM AND |
| 880.0 POUNDS MAXIMUM |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| SPECIAL FEATURES | PASSIVATE,QQ-P-35,RINGS AND BALLS; 20 DROPS OF SPECIFIED LUBRICANT FROMNO. 26 HYPODERMIC NEEDLE |
| SPECIFICATION/STANDARD DATA | 58260-13084019 GOVERNMENT SPECIFICATION |