| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| OUTER RING WIDTH | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM |
| OVERALL LENGTH | 0.6875 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.4995 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | PLATING ON EXPOSED SURFACES ONLY; COTTER PIN HOLE IN STUD 0.070 IN. DIA NOM,0.100 IN. FROM STUD END |
| SPECIFICATION/STANDARD DATA | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| STUD DIAMETER | 0.1885 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| STUD LENGTH | 0.4065 INCHES NOMINAL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.3440 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNJF |