| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 17.0 MILLIMETERS NOMINAL |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0007 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6441 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP 4340 RETAINER |
| OVERALL OUTSIDE DIAMETER | 35.0 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 10.0 MILLIMETERS NOMINAL |
| PRECIOUS MATERIAL AND LOCATION | PLATED RETAINER SILVER |
| PRECIOUS MATERIAL | SILVER |
| RETAINER FABRICATION METHOD | PRESSED |
| SPECIAL FEATURES | DOUBLE HOLDING WIRES ON EACH OUTSIDE CORNERS OF OUTER RING,STEEL 17-4PH;BEARINGS TO BE DEMAGNETIZED,RESIDUAL FIELD STRENGTH NOT TO EXCEED 5.0 GAUSS |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | 4 POINT BALL CONTACT, SPLIT OUTER RING, SPEARABLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT | SILVER RETAINER |