| BORE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81397 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL OUTSIDE DIAMETER | 0.7498 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1950 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 1 |
| SPECIAL FEATURES | FILL LUBE TO 33 PERCENT CAPACITY |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |