| MATERIAL | STEEL END PLATE |
| STEEL COMP E52100 OUTER RING |
| STEEL COMP E52100 ROLLER |
| PLASTIC ACETAL OR |
| PLASTIC POLYAMIDE SEAL |
| STEEL COMP E52100 STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| SURFACE TREATMENT | CADMIUM END PLATE |
| CHROMIUM OUTER RING |
| CADMIUM STUD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE |
| QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD LENGTH | 0.3590 INCHES NOMINAL |
| OVERALL LENGTH | 1.1000 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.8745 INCHES MINIMUM AND |
| 0.8760 INCHES MAXIMUM |
| STUD DIAMETER | 0.3735 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4640 INCHES MINIMUM AND |
| 0.4690 INCHES MAXIMUM |
| STUD LENGTH | 0.6090 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | RIGID |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | COTTER PIN HOLE IN STUD 0.100 IN. FROM STUD END,0.106 IN. DIA |
| SPECIFICATION/STANDARD DATA | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |