| MATERIAL | STEEL END PLATE |
| STEEL OUTER RING |
| STEEL ROLLER |
| PLASTIC POLYAMIDE AND |
| MOLYBDENUM SEAL |
| STEEL STUD |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| CHROMIUM OUTER RING OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING OUTSIDE DIAMETER |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD LENGTH | 0.2500 INCHES NOMINAL |
| OVERALL LENGTH | 1.0000 INCHES MINIMUM AND |
| 1.0312 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5010 INCHES MAXIMUM |
| STUD DIAMETER | 0.2485 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3700 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| STUD LENGTH | 0.5938 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | RIGID |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | BRASS OIL-HOLE PLUG ROLLER END |