| MATERIAL | STEEL END PLATE |
| STEEL COMP E52100 OUTER RING |
| STEEL COMP E52100 ROLLER |
| PLASTIC ACETAL SEAL |
| STEEL COMP E52100 STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| CHROMIUM OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD LENGTH | 0.3440 INCHES NOMINAL |
| OVERALL LENGTH | 0.7560 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL |
| STUD DIAMETER | 0.1900 INCHES NOMINAL |
| OUTER RING WIDTH | 0.2810 INCHES NOMINAL |
| STUD LENGTH | 0.4690 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | RIGID |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | COTTER PIN HOLE IN THREADED END OF STUD,0.100 IN. FROM STUD END,0.070 IN. DIA; NO LUBRICATOR |
| SPECIFICATION/STANDARD DATA | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |