|
|
|
National Stock Number:
3110-01-206-0750
Federal Supply Class:
3110
National Item Identification Number:
012060750
Description:
PLATE,RETAINING,BEARING
Detail:
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
|
Manufacturer Information:
| 570181-3 | 20418 | DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING |
|
Techincal Specification:
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.127 INCHES NOMINAL | | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.127 INCHES NOMINAL | | APERTURE DIAMETER | 1.506 INCHES MINIMUM AND 1.511 INCHES MAXIMUM | | BODY DIAMETER | 2.000 INCHES NOMINAL | | BODY THICKNESS | 0.15625 INCHES MINIMUM AND 0.17187 INCHES MAXIMUM | | COUNTERBORE DIAMETER | 1.740 INCHES MINIMUM AND 1.742 INCHES MAXIMUM | | COUNTERBORE DEPTH | 0.280625 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | COUNTERBORED W/ APERTURE | | DISTANCE BETWEEN HOLES ALONG LENGTH | 2.254 INCHES NOMINAL | | DISTANCE BETWEEN HOLES ALONG WIDTH | 2.254 INCHES NOMINAL | | LENGTH ACROSS FLATS | 2.750 INCHES NOMINAL | | OUTSIDE DIAMETER | 3.6875 INCHES NOMINAL | | OVERALL THICKNESS | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | MATERIAL | MAGNESIUM ALLOY AZ80A OVERALL | | MINOR THICKNESS | 0.04675 INCHES MINIMUM AND 0.06275 INCHES MAXIMUM | | MOUNTING HOLE DIAMETER | 0.180 INCHES NOMINAL | | MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES | | MOUNTING HOLE TYPE | ROUND, UNTHREADED | | WIDTH ACROSS FLATS | 2.750 INCHES NOMINAL | | STYLE DESIGNATOR | FOUR FLATS |
|
|