| BORE DIAMETER | 0.0935 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.2334 INCHES MINIMUM AND 0.2344 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0180 INCHES NOMINAL |
| FUNCTIONAL DESCRIPTION | DEEP GROOVE FLANGED EXTENDED INNER RING STD MINIATURE AND INSTR APPL |
| INNER RING WIDTH | 0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE OR ANDEROL/LEHIGH L-401D MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL LUBRICATING |
| OUTER RING OUTSIDE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.0927 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE J404 UNS S41000 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 410 RETAINER |
| RETAINER FABRICATION METHOD | PRESSED |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |