| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.9670 INCHES MINIMUM AND 0.9740 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0600 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING OUTSIDE DIAMETER | 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| OVERALL WIDTH | 0.2762 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | FIBER AND ALUMINUM SEAL |
| MATERIAL | PLASTIC PHENOLIC CAGE |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |