| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 305 OR |
| STEEL COMP 430 RETAINER |
| STEEL COMP 305 SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| AISI/SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| AISI/SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| AISI/SAE J405 UNS S30500 ASSN STD 1ST MATERIAL RESPONSE OR |
| AISI/SAE J405 UNS S43000 ASSN STD 2ND MATERIAL RESPONSE RETAINER |
| AISI/SAE J405 UNS S30500 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 10.0 MILLIMETERS NOMINAL |
| BORE DIAMETER | 12.0 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 32.0 MILLIMETERS NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-27617 MIL SPEC SINGLE MATERIAL RESPONSE AND |
| KRYTOX 240AC MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | STAMPED |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0005 INCHES MAXIMUM RADIAL |