| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 410 RETAINER |
| STEEL COMP 410 SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| AISI/SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| AISI/SAE J405 UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| AISI/SAE J405 UNS S41000 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| AISI/SAE J405 UNS S41000 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.1950 INCHES MINIMUM AND |
| 0.1960 INCHES MAXIMUM |
| BORE DIAMETER | 0.2498 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 0.6875 INCHES NOMINAL |
| FLANGE WIDTH | 0.0420 INCHES NOMINAL |
| OUTER RING OUTSIDE DIAMETER | 0.6248 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE AND |
| AEROSHELL 7 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0008 INCHES MAXIMUM RADIAL |
| FUNCTIONAL DESCRIPTION | STD LOW TORQUE FLG MINIATURE AND INSTR APPL |