|
|
|
National Stock Number:
3110-01-285-2815
Federal Supply Class:
3110
National Item Identification Number:
012852815
Description:
CAM FOLLOWER,NEEDLE BEARING
Detail:
An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.
|
Manufacturer Information:
| 8644837 | 18894 | AIR ARMAMENT CENTER/ EN | | CCFH-1 1/4-SB | 92563 | MCGILL MANUFACTURING CO, INC | | HR-1.25-XBC | 07484 | ACCURATE BUSHING COMPANY, INC. | | X8644837 | 07484 | ACCURATE BUSHING COMPANY, INC. | | X8644837 | 18894 | AIR ARMAMENT CENTER/ EN | | X8644837 | 92563 | MCGILL MANUFACTURING CO, INC |
|
Techincal Specification:
| MATERIAL | STEEL END PLATE | | STEEL OUTER RING | | STEEL ROLLER | | PLASTIC POLYAMIDE SEAL | | STEEL STUD | | SURFACE TREATMENT | OXIDE EXPOSED SURFACES AS MOUNTED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED | | STYLE DESIGNATOR | CAM FOLLOWER | | THREAD LENGTH | 0.6200 INCHES MINIMUM | | OVERALL LENGTH | 2.0300 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 1.2490 INCHES MINIMUM AND | | 1.2500 INCHES MAXIMUM | | STUD DIAMETER | 0.7500 INCHES MINIMUM AND | | 0.7510 INCHES MAXIMUM | | OUTER RING WIDTH | 0.7450 INCHES MINIMUM AND | | 0.7500 INCHES MAXIMUM | | STUD LENGTH | 1.2500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | SEAL QUANTITY | 2 | | BEARING SEAL TYPE | CONTACT | | LUBRICATION MATERIAL | LUBRICANT | | SPECIAL FEATURES | CROWNED OUTSIDE DIAMETER; HEXAGONAL HOLE IN FACE OF STUD 0.250 IN. DIA,0.12 IN. DEEP MIN |
|
|