| BEARING SEAL TYPE | CONTACT |
| FEATURES PROVIDED | LUBRICATION HOLE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| OVERALL LENGTH | 2.4060 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.4990 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392 FED SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| MATERIAL | PLASTIC ACETAL OR PLASTIC POLYAMIDE (NYLON) SEAL |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP E52100 STUD |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; PLUG TO BE SUPPLIED TO CLOSE OFF UNUSED LUBE HOLE IN END OF SHANK; CROWNED OD |
| SEAL QUANTITY | 2 |
| SPECIFICATION/STANDARD DATA | 76301-4-340 MANUFACTURERS STANDARD |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| STUD DIAMETER | 0.8750 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM |
| STUD LENGTH | 1.5000 INCHES NOMINAL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT | CADMIUM OUTER RING |
| SURFACE TREATMENT | CHROMIUM ROLLER |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.7500 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 14 |