| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC POLYTETRAFLUOROETHYLENE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 3656 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 3655 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE BALL |
| ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING |
| ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OUTER RING |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.5000 INCHES NOMINAL |
| BORE DIAMETER | 1.3125 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.7500 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | CODE 7001,717806000,CAGEC 04939 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| SURFACE FINISH | GROUND |
| LOAD DIRECTION | ANGULAR |
| BEARING PRELOAD RATING | 11.0 POUNDS MINIMUM AND |
| 15.0 POUNDS MAXIMUM |
| CONTACT ANGLE | 23.0 DEGREES NOMINAL |
| SPECIAL FEATURES | EACH BEARING SHALL BE LUBRICATED WITH 3 OR 4 DROPS OF SPECIFIED LUBRICANT |