| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC POLYTETRAFLUOROETHYLENE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 3655 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CODE 2402,717806000 CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE BALL |
| CODE 2402,717806000 CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE INNER RING |
| CODE 2402,717806000 CAGEC 04939 MFR REF SINGLE TREATMENT RESPONSE OUTER RING |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.3120 INCHES NOMINAL |
| BORE DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | CODE 7001,717806000 CAGEC 04939 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | ANGULAR |
| BEARING PRELOAD RATING | 4.0 POUNDS MINIMUM AND |
| 6.0 POUNDS MAXIMUM |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| SPECIAL FEATURES | EACH BEARING SHALL BE LUBRICATED WITH 2 DROPS OF SPECIFIED LUBRICANT |