| BEARING SEAL TYPE | CONTACT |
| FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| OUTER RING WIDTH | 0.4638 INCHES MINIMUM AND 0.4688 INCHES MAXIMUM |
| OVERALL LENGTH | 0.8750 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.8745 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ACETAL RESIN,NYLON MFR REF SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J404,UNS G52986 ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J404,UNS G52986 ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J404,UNS G52986 ASSN STD SINGLE MATERIAL RESPONSE STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J404,UNS G52986 ASSN STD SINGLE MATERIAL RESPONSE END PLATE |
| MATERIAL | PLASTIC ACETAL SEAL |
| MATERIAL | STEEL COMP E52100 END PLATE |
| MATERIAL | STEEL COMP E52100 OUTER RACE |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP E52100 STUD |
| SEAL QUANTITY | 2 |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNJF |
| TYPE/MODEL DESIGNATION | AFBMA-HRS4C |
| SPECIFICATION/STANDARD DATA | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| STUD DIAMETER | 0.3735 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| STUD LENGTH | 0.7188 INCHES MINIMUM AND 0.7656 INCHES MAXIMUM |
| STYLE DESIGNATOR | CAM FOLLOWER |
| SUPPLEMENTARY FEATURES | LUBRICATOR FITTING NAS516-1 LOCATED FLANGED END OF STUD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT | CHROMIUM ROLLER |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.3594 INCHES NOMINAL |