| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 410 OR |
| STEEL COMP 303 RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR |
| QQ-S-766,COND A FED SPEC 2ND MATERIAL RESPONSE RETAINER |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.1240 INCHES MINIMUM AND |
| 0.1250 INCHES MAXIMUM |
| BORE DIAMETER | 0.2498 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 0.5460 INCHES MINIMUM AND |
| 0.5470 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0210 INCHES MINIMUM AND |
| 0.0230 INCHES MAXIMUM |
| OUTER RING OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-81846 MIL SPEC SINGLE MATERIAL RESPONSE |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0004 INCHES MAXIMUM RADIAL |
| SPECIAL FEATURES | 571-9442-01 /25583 NO LONGER CONSIDERED A SOURCE CONTROL DRWG AS TERMINAL STOCK IS ONLY AVAILABLE FROM CAGE CODE 25583 |