| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL CORROSION RESISTING RETAINER |
| PLASTIC POLYTETRAFLUOROETHYLENE AND |
| PLASTIC TETRAFLUOROETHYLENE AND |
| GLASS FIBER SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE BALL |
| ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING |
| ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OUTER RING |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.1250 INCHES NOMINAL |
| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.3125 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | RIGID |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0004 INCHES MAXIMUM RADIAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-B-81793C GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-B-81793/3 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M81793/03-HB1JXN1F1 |