| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 440C RETAINER |
| PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| STEEL CORROSION RESISTING SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE RETAINER |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.1250 INCHES NOMINAL |
| BORE DIAMETER | 0.2500 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 0.5470 INCHES NOMINAL |
| FLANGE WIDTH | 0.0230 INCHES NOMINAL |
| OUTER RING OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0005 INCHES MAXIMUM RADIAL |