| BEARING PRELOAD RATING | 15.0 POUNDS MINIMUM AND 25.0 POUNDS MAXIMUM |
| BORE DIAMETER | 4.0000 INCHES NOMINAL |
| CONTACT ANGLE | 27.0 DEGREES MINIMUM AND 33.0 DEGREES MAXIMUM |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | FN 2,CAGEC 80070 MFR REF SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 4.6250 INCHES NOMINAL |
| OVERALL WIDTH | 0.6250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25988,TYPE 1,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE ALIGNMENT RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | GREASE LUBRICATION |
| MATERIAL | RUBBER FLUOROSILICONE CLASS FQ AND PLASTIC PHENOLIC AND RUBBER FLUOROSILICONE CLASS FQ AND STEEL CORROSION RESISTING SHIELD |
| SHIELD QUANTITY | 2 |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | IF PHENOLIC REINFORCEMENT IS UTILIZED,VARNISH EXPOSED SURFACES WITH MIL-V-173 VARNISH TER MIL-T-152 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING |
| SURFACE FINISH | GROUND |