| DISTANCE BETWEEN HOLES ALONG LENGTH | 0.681 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 0.481 INCHES NOMINAL |
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.240 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.340 INCHES NOMINAL |
| EDGE ANGLE | 0.120 RADIANS NOMINAL |
| APERTURE DIAMETER | 0.312 INCHES NOMINAL |
| COUNTERBORE DEPTH | 0.149 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM |
| CROSS-SECTIONAL SHAPE STYLE | COUNTERBORED W/ APERTURE |
| LENGTH | 0.994 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINOR THICKNESS | 0.186 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| OVERALL THICKNESS | 0.273 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| SPECIAL FEATURES | 3 ADDITIONAL MOUNTING HOLES |
| WIDTH | 0.847 INCHES NOMINAL |
| STYLE DESIGNATOR | OFFSET |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |