| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC RETAINER |
| STEEL CORROSION RESISTING SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.1406 INCHES NOMINAL |
| BORE DIAMETER | 0.1250 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 0.4220 INCHES NOMINAL |
| FLANGE WIDTH | 0.0310 INCHES NOMINAL |
| OUTER RING OUTSIDE DIAMETER | 0.3750 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIS-30520,CAGEC 58260 MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MOLDED |
| SHIELD QUANTITY | 2 |
| ALIGNMENT TYPE | RIGID |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0005 INCHES MAXIMUM RADIAL |
| SPECIAL FEATURES | DID AND CENTRIFUGE AT 200 G FOR 1 PORM 0.1 MINUTE IN SPECIFIED LUBE |