| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC POLYAMIDE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MIL-R-46198,TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE BALL |
| ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING |
| ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OUTER RING |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| OVERALL WIDTH | 0.7100 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| BORE DIAMETER | 11.9994 INCHES MINIMUM AND |
| 12.0000 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 12.7494 INCHES MINIMUM AND |
| 12.7500 INCHES MAXIMUM |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | 717806000,CAGEC 04939 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | ANGULAR |
| BEARING PRELOAD RATING | 475.0 POUNDS MINIMUM AND |
| 525.0 POUNDS MAXIMUM |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| SPECIAL FEATURES | EACH BEARING SHALL BE LUBRICATED WITH 9 DROPS MIN,11 DROPS MAX OF SPECIFIED LUBE EVENLY DISTRIBUTED AROUND CIRCUMFERENCE |