| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| STEEL COMP 440C RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 0.3590 INCHES NOMINAL |
| FLANGE WIDTH | 0.0360 INCHES NOMINAL |
| OUTER RING WIDTH | 0.1250 INCHES NOMINAL |
| INNER RING WIDTH | 0.1562 INCHES NOMINAL |
| OUTER RING OUTSIDE DIAMETER | 0.3125 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | RIGID |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0005 INCHES MAXIMUM RADIAL |
| SPECIAL FEATURES | OPERATING TEMP -65.0 F TO +300.0 F; SEALS FLURO-POLYMER-COATED GLASS CLOTH WASHER |