| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP E52100 OR |
| STEEL COMP 440C OUTER RING |
| PLASTIC PHENOLIC RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| AISI ASSN STD 2ND MATERIAL RESPONSE INNER RING |
| AISI ASSN STD 2ND MATERIAL RESPONSE OUTER RING |
| OVERALL WIDTH | 0.4950 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| BORE DIAMETER | 4.7494 INCHES MINIMUM AND |
| 4.7500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 5.2492 INCHES MINIMUM AND |
| 5.2500 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MOLDED |
| LOAD DIRECTION | ANGULAR |
| BEARING PRELOAD RATING | 100.0 POUNDS NOMINAL |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| SPECIAL FEATURES | 0.010-IN. MIN GAP-INNER RACES CLAMPED AT ASSY TO OBTAIN PRELOAD; E52100 RACES COATED WITH KAYDON CR101 CROMATE;25 PCT FULL OF SPECIFIED LUBE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 72314 |
| MFR SOURCE CONTROLLING REFERENCE | 1264-469 |