| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SURFACE TREATMENT | PASSIVATE BALL |
| PASSIVATE INNER RING |
| PASSIVATE OUTER RING |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| BORE DIAMETER | 0.0781 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 0.2960 INCHES NOMINAL |
| FLANGE WIDTH | 0.0310 INCHES NOMINAL |
| OUTER RING WIDTH | 0.1406 INCHES NOMINAL |
| INNER RING WIDTH | 0.1719 INCHES NOMINAL |
| OUTER RING OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| ALIGNMENT TYPE | RIGID |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND |
| 0.0005 INCHES MAXIMUM RADIAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING BALL ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, FLANGED, INNER RING EXTENDED, CORROSION RESISTANT STEEL, ABEC5P |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M81793/15-DB1C1N1A1 |