| MATERIAL | STEEL BALL |
| MATERIAL | STEEL INNER RING |
| MATERIAL | STEEL OUTER RING |
| INNER RING WIDTH | 27.5 MILLIMETERS MINIMUM AND 28.5 MILLIMETERS MAXIMUM |
| OUTER RING WIDTH | 27.5 MILLIMETERS MINIMUM AND 28.5 MILLIMETERS MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 732.0 MILLIMETERS MINIMUM AND 738.0 MILLIMETERS MAXIMUM |
| OVERALL WIDTH | 34.5 MILLIMETERS MINIMUM AND 35.5 MILLIMETERS MAXIMUM |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | C/W REMOVEABLE GREASE FITTING;THREADS AND HOLE AND RACEWAYS TO BE FREE OF PROTECTIVE FINISH;SEVEN 12X M10X1.5 HOLES OUTER RING; SEVEN 12X M10X1.5 HOLES INNER RING; FOUR 16.0 MM MIN TO 16.3 MM MAX DIA MOUNTING HOLES, MOUNTING HOLES ARE COUNTERSUNK 17.5 MM MIN TO 18.5 MM MAX DIA BY 38.0 DEG TO 42.0 DEG MAX;LUB HOLE 3X 0.250-28 UNF 2A RH EQUALLY SPACED |
| STYLE DESIGNATOR | LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | IAW MIL-C-26074, CLASS 1, GRADE C ASSN STD SINGLE TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | IAW MIL-C-26074, CLASS 1, GRADE C ASSN STD SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT | NICKEL INNER RING |
| SURFACE TREATMENT | NICKEL OUTER RING |
| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 606.0 MILLIMETERS MINIMUM AND 609.0 MILLIMETERS MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FEATURES PROVIDED | LUBRICATION HOLE |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-10924 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL | RUBBER SYNTHETIC SEAL |