3120-00-009-9095, BEARING,SLEEVE

National Stock Number:
3120-00-009-9095

Federal Supply Class:
3120

National Item Identification Number:
000099095

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

A51B91610-11	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51B91610-11	61174	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51B91610-11	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

ANTIROTATION/LUBRICATION TYPE AND QUANTITY	2 HOLE
BODY INSIDE DIAMETER	2.2420 INCHES MINIMUM AND 2.2470 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	2.5014 INCHES MINIMUM AND 2.5020 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER	2.8200 INCHES NOMINAL
FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HOLE DIAMETER	0.1860 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM FIRST
LUBRICANT ACCOMMODATION STYLE	GROOVED CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4340 OVERALL
OVERALL LENGTH	0.6670 INCHES MINIMUM AND 0.6770 INCHES MAXIMUM
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE GROOVE LOCATION AND QUANTITY	1 EXTERNAL AND 1 INTERNAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial