| MATERIAL | COPPER ALLOY INNER LAYER |
| STEEL COMP 302 OUTER LAYER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-682 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER |
| STYLE DESIGNATOR | HALF SLEEVE, EXTERNAL FLANGES BOTH ENDS |
| OVERALL LENGTH | 3.2190 INCHES MINIMUM AND |
| 3.2210 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 6.7480 INCHES MINIMUM AND |
| 6.7490 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 6.1660 INCHES MINIMUM AND |
| 6.1675 INCHES MAXIMUM |
| LEFT FLANGE OUTSIDE DIAMETER | 7.2400 INCHES MINIMUM AND |
| 7.2600 INCHES MAXIMUM |
| RIGHT FLANGE OUTSIDE DIAMETER | 7.2400 INCHES MINIMUM AND |
| 7.2600 INCHES MAXIMUM |
| LEFT FLANGE WIDTH | 0.2960 INCHES MINIMUM AND |
| 0.2980 INCHES MAXIMUM |
| RIGHT FLANGE WIDTH | 0.2960 INCHES MINIMUM AND |
| 0.2980 INCHES MAXIMUM |
| CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| SQUARE OUTSIDE RIGHT CORNER |
| SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| SQUARE LEFT FLANGE BODY CORNER |
| SQUARE RIGHT FLANGE OUTSIDE LEFT CORNER |
| SQUARE RIGHT FLANGE BODY CORNER |
| ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 4 HOLE |
| HOLE DIAMETER | 0.3125 INCHES NOMINAL FIRST |
| DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | 1.3125 INCHES NOMINAL FIRST |
| HOLE SPACING ANGLE | 7.0 DEGREES NOMINAL |
| SURFACE FINISH | 16.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY |
| 63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| 63.0 MICROINCHES LEFT END SURFACE OF RIGHT FLANGE |
| 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF LEFT FLANGE |
| 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF RIGHT FLANGE |
| 63.0 MICROINCHES RIGHT END SURFACE OF BODY AND FLANGE |
| 63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| SURFACE GROOVE LOCATION AND QUANTITY | 1 INTERNAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 55380 |
| DESIGN CONTROL REFERENCE | 3262124 |