| BORE CENTER TO SHANK END DISTANCE | 0.9700 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM |
| HARDNESS RATING | 34.0 ROCKWELL C NOMINAL ROD END BODY |
| HARDNESS RATING | 59.0 ROCKWELL C NOMINAL INNER MEMBER |
| INNER MEMBER WIDTH | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.5420 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.1770 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM |
| OVERALL LENGTH | 1.2680 INCHES MINIMUM AND 1.3110 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6728 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-465 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 40 ASSN STD SINGLE MATERIAL RESPONSE LUBRICATION |
| MATERIAL | COPPER ALLOY RACE INSERT |
| MATERIAL | OIL LUBRICATING LUBRICATION |
| MATERIAL | STEEL INNER MEMBER |
| MATERIAL | STEEL ROD END BODY |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| SPECIAL FEATURES | LUBRICATION GROOVE FORMED BY TWO PIECE RACE INSERT |
| STATIC RADIAL LOAD RATING | 2890 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349- MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.250 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 28 |