5325-00-214-4158 LATCH,SNAPSLIDE FASTENER Index 5315-00-214-4202 PIN,STRAIGHT,HEADED

National Stock Number:
3120-00-214-4199

Federal Supply Class:
3120

National Item Identification Number:
002144199

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
107-10713002GOODRICH CORPORATION
107-1076K4C8GOODRICH CORPORATION
3-40512-776823NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
MATERIALCOPPER ALLOY 955 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM INSIDE DIAMETER SURFACE OF BODY
CADMIUM OUTSIDE DIAMETER SURFACE OF BODY
CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE
CADMIUM RIGHT END SURFACE OF BODY
CADMIUM RIGHT END SURFACE OF LEFT FLANGE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH0.4400 INCHES NOMINAL
BODY OUTSIDE DIAMETER0.5009 INCHES MINIMUM AND
0.5015 INCHES MAXIMUM
BODY INSIDE DIAMETER0.3730 INCHES MINIMUM AND
0.3740 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER0.7500 INCHES NOMINAL
FLANGE WIDTH0.0590 INCHES MINIMUM AND
0.0600 INCHES MAXIMUM
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
SQUARE OUTSIDE RIGHT CORNER
SQUARE INSIDE RIGHT CORNER
SQUARE INSIDE LEFT CORNER
SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
SQUARE LEFT FLANGE BODY CORNER
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
32.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
125.0 MICROINCHES RIGHT END SURFACE OF BODY
125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
THE MANUFACTURERS DATA
MANUFACTURERS CODE13002
DESIGN CONTROL REFERENCE107-107


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us