| MATERIAL | STEEL INNER MEMBER |
| STEEL RACE INSERT |
| PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| STEEL ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| FED-STD-66 FED STD SINGLE MATERIAL RESPONSE RACE INSERT |
| 206-001-057-3,97499 MFR REF SINGLE MATERIAL RESPONSE RACE LINER |
| FED-STD-66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| HARDNESS RATING | 57.0 ROCKWELL C MINIMUM AND |
| 61.0 ROCKWELL C MAXIMUM INNER MEMBER |
| 26.0 ROCKWELL C NOMINAL ROD END BODY |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| CADMIUM ROD END BODY |
| STYLE DESIGNATOR | SHOULDERED BALL TYPE |
| OVERALL LENGTH | 1.7990 INCHES MINIMUM AND |
| 1.8390 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.8020 INCHES MINIMUM AND |
| 0.8220 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.3980 INCHES MINIMUM AND |
| 1.4280 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3020 INCHES MINIMUM AND |
| 0.3120 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4250 INCHES MINIMUM AND |
| 0.4300 INCHES MAXIMUM |
| SHANK END TO SHOULDER LENGTH | 0.4550 INCHES MINIMUM AND |
| 0.4850 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 1800 POUNDS |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.4930 INCHES MINIMUM AND |
| 0.5280 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.250 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | EXCLUDE PLATING ON SHANK |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 97499 |
| MFR SOURCE CONTROLLING REFERENCE | 206-001-057-3 |