|
|
|
National Stock Number:
3120-00-301-5579
Federal Supply Class:
3120
National Item Identification Number:
003015579
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| B68-13-505 | 81361 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY OVERALL | | STYLE DESIGNATOR | ROUND W/SQUARE KEYS | | KEY LENGTH | 0.0910 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.0050 INCHES NOMINAL | | KEY WIDTH | 0.0938 INCHES NOMINAL | | KEY QUANTITY | 6 | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.0160 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.4330 INCHES NOMINAL | | SURFACE FINISH | 25.0 MICROINCHES LEFT SIDE | | 25.0 MICROINCHES RIGHT SIDE |
|
|