5360-00-321-1450 SPRING,HELICAL,COMPRESSION Index 5330-00-321-1467 SEAL ASSY,INLET COOLER

National Stock Number:
3120-00-321-1464

Federal Supply Class:
3120

National Item Identification Number:
003211464

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
A51H20653-1326512NORTHROP GRUMMAN SYSTEMS CORPORATION
A51H20653-1361174NORTHROP GRUMMAN SYSTEMS CORPORATION
A51H20653-1379RG9NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
BODY INSIDE DIAMETER0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM
FLANGE WIDTH0.0885 INCHES MINIMUM AND 0.0995 INCHES MAXIMUM
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
OVERALL LENGTH0.3635 INCHES MINIMUM AND 0.3795 INCHES MAXIMUM
MATERIALSTEEL COMP 4340 OVERALL
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
TEST DATA DOCUMENT81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us