|
|
|
National Stock Number:
3120-00-386-0860
Federal Supply Class:
3120
National Item Identification Number:
003860860
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 1387029 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 13G584PC35 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 15E459PC7 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 16F492PC12 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 18F84PC8-12 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 18F976PC11 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 19F595PC11 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 19F603PC55 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 20F997PC11 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 39J531PC7-12 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 40J120PC129 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 5H126-1 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 5H126PC1 | 79500 | WESTINGHOUSE ELECTRIC CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE FIRST INSIDE CORNER | | CORNER SHAPE | SQUARE FIRST OUTSIDE CORNER | | CORNER SHAPE | SQUARE FOURTH INSIDE CORNER | | CORNER SHAPE | SQUARE SECOND INSIDE CORNER | | CORNER SHAPE | SQUARE SECOND OUTSIDE CORNER | | CORNER SHAPE | SQUARE THIRD INSIDE CORNER | | COUNTERBORE DEPTH | 0.1250 INCHES NOMINAL | | COUNTERBORE DIAMETER | 2.7500 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | COUNTERBORED | | DIAMETER | 2.4980 INCHES NOMINAL | | OUTSIDE DIAMETER | 4.6250 INCHES NOMINAL | | OVERALL THICKNESS | 0.2500 INCHES NOMINAL | | MATERIAL | LUBRICANT LUBRICATION | | SPECIAL FEATURES | 12 GROOVES ON THE COUNTERBORED SIDE PLUS ONE 0.1770 IN. DIA HOLE5/32 IN. DEEP 1 17/32 IN. FROM CENTER | | STYLE DESIGNATOR | ROUND |
|
|