|
|
|
National Stock Number:
3120-00-472-5157
Federal Supply Class:
3120
National Item Identification Number:
004725157
Description:
BEARING,SLEEVE
Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.
|
Manufacturer Information:
| 2578556-001A | 06848 | HONEYWELL INTERNATIONAL INC | | 2578556-001A | 13002 | GOODRICH CORPORATION | | 2578556-001A | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2578556-001A | 55284 | HONEYWELL INTERNATIONAL INC. | | 2578556-001A | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | OVERALL LENGTH | 0.8760 INCHES NOMINAL | | BODY OUTSIDE DIAMETER | 1.5000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.2440 INCHES MINIMUM AND | | 1.2490 INCHES MAXIMUM | | FLANGE OUTSIDE DIAMETER | 1.9400 INCHES NOMINAL | | FLANGE WIDTH | 0.1560 INCHES NOMINAL | | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 1 HOLE | | HOLE DIAMETER | 0.0600 INCHES NOMINAL FIRST | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | LUBRICANT ACCOMMODATION STYLE | GROOVED CIRCULAR | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 13002 | | DESIGN CONTROL REFERENCE | 2578556-001A |
|
|