3120-00-516-1139, BUSHING,SLEEVE

5360-00-516-1134 SPRING,HELICAL,COMPRESSION

National Stock Number:
3120-00-516-1139

Federal Supply Class:
3120

National Item Identification Number:
005161139

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

47-267-141-1

97499

BELL TEXTRON INC

Techincal Specification:

MATERIAL	STEEL COMP 4140 OR
	STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626,COND C4 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-6758,C4 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH	0.3480 INCHES MINIMUM AND
	0.3580 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.3135 INCHES MINIMUM AND
	0.3140 INCHES MAXIMUM
BODY INSIDE DIAMETER	0.1871 INCHES MINIMUM AND
	0.1872 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER	0.4270 INCHES MINIMUM AND
	0.4470 INCHES MAXIMUM
FLANGE WIDTH	0.1780 INCHES MINIMUM AND
	0.1880 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER
	SQUARE INSIDE RIGHT CORNER
	SQUARE INSIDE LEFT CORNER
	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
	UNDERCUT LEFT FLANGE BODY CORNER
SURFACE FINISH	63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
	63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
	32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
	63.0 MICROINCHES RIGHT END SURFACE OF BODY
	63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	97499
DESIGN CONTROL REFERENCE	47-267-141-1

Click here to Register for Free 30-day Trial