3120-00-624-5239, BUSHING,SLEEVE

National Stock Number:
3120-00-624-5239

Federal Supply Class:
3120

National Item Identification Number:
006245239

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

204-040-235-001	97499	BELL TEXTRON INC
204-040-235-1	04614	TEXTRON SYSTEMS CORPORATION
204-040-235-1	80070	LOCKHEED MARTIN CORPORATION
204-040-235-1	97499	BELL TEXTRON INC

Techincal Specification:

MATERIAL	STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758,D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
OVERALL LENGTH	3.6300 INCHES MINIMUM AND
	3.6500 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.1271 INCHES MINIMUM AND
	1.1281 INCHES MAXIMUM
BODY INSIDE DIAMETER	0.9670 INCHES MINIMUM AND
	0.9720 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER	2.9900 INCHES MINIMUM AND
	3.0100 INCHES MAXIMUM
FLANGE WIDTH	0.0920 INCHES MINIMUM AND
	0.0960 INCHES MAXIMUM
RIGHT INTERNAL FLANGE HOLE DIAMETER	0.8370 INCHES MINIMUM AND
	0.8420 INCHES MAXIMUM
RIGHT INTERNAL FLANGE WIDTH	0.9100 INCHES MINIMUM AND
	0.9500 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER
	SQUARE INSIDE RIGHT CORNER
	CHAMFERED INSIDE LEFT CORNER
	CHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER
	ROUND LEFT FLANGE BODY CORNER
SURFACE FINISH	63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
	63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
	32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
	63.0 MICROINCHES RIGHT END SURFACE OF BODY
	63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
TEST DATA DOCUMENT	97499-BPS4075 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND
	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND
	97499-BPS1034 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	97499
DESIGN CONTROL REFERENCE	204-040-235-1

Click here to Register for Free 30-day Trial