|
|
|
National Stock Number:
3120-00-741-1598
Federal Supply Class:
3120
National Item Identification Number:
007411598
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 7411598 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 8613561 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 8613561 | 24617 | GENERAL MOTORS CORP | | 8613561 | 72590 | HYDRAMATIC DIV OF GENERAL MOTORS CORP | | 8613561 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 2.5650 INCHES MINIMUM AND 2.5750 INCHES MAXIMUM | | OUTSIDE DIAMETER | 3.1250 INCHES NOMINAL | | OVERALL THICKNESS | 0.0870 INCHES MINIMUM AND 0.0910 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE CONDITION | GROUND |
|
|